This remote control is a 4-channel rolling code remote control for the Sommer system. The handheld transmitter impresses on the one hand with its compact and practical design, and on the other hand with its simple commissioning and operation. With its four channels, you can program and control up to four different Sommer drives.
It is a high-quality, robust replacement that includes a protective sliding cover.
This remote control pairs with your Sommer receiver unit just like the original.
Compatible with: for SOMMER 4026 TX03-868-2, for SOMMER 4020 TX03-868-4, for SOMMER 4031, for SOMMER 4025, for SOMMER 4011, for SOMMER 4035, for APERTO 4025, for APERTO 4021, 4020V000, 4025V000, 4026V000, 4031V000, 4011V000, 4035V002
IMPORTANT!!!
Not compatible with for SOMMER TX55 868
Not compatible with for Sommer 868 MHz SOMloq2 (Pearl, Pearl Twin, Pearl handheld transmitters)
Note:
If the remote control's LED light is green or yellow, it is not compatible.
Access to the receiver is required. Make sure you have access to the receiver/opener before purchase.
Disclaimer: Before purchasing, please ensure that your SOMMER remote control is 868MHz frequency and that the LED light is red.
Programming instructions
The remote control has the same function as your original remote control. It must be programmed with the receiver according to your user manual when you receive it.
1. Locate the Learn / Code Set button on the motor. This is usually under the lamp cover, or on the back of the motor.
2. Press the Learn / Code Set button once, and release it. A light should illuminate.
3. Press the desired transmitter button once, and the light will turn off.
4. Press the remote control again, and the light will flash on the motor and then turn off, indicating that the remote control is coded.
5. Test the remote control's function.
Color: black + red + silver
Material: plastic + metal
Package contents:
2 x Remote control
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture to be slightly different from the real thing. The allowed measurement error is +/- 1-3 cm.