Specifications: 1) Distance: 50-150 meters.
2) Very mini size: 5.5 cm x 4.5 cm x 1.0 cm.
3) One receiver can work with 400 codes.
4) It is not Compatible with other remote controls and receivers.
5) Brand selector: With 8 dip switches, the user can make Compatible with different combinations Compatible with different remote controls. Power input selector: This receiver can work at AC/DC 9V~30V. However, it is better to change the PIS according to the power input. If the input is greater than 24V, short circuit pin 2&3; short circuit 1&2 if the input is less than 24V.
Color: white + black
Material: ABS
Programming a new remote control
1) Select the correct brand Compatible with the remote control to be programmed by moving the dip switches UP or DOWN. Compatible with example 433.92Mhz remote controls, just move Dip switch 7 UP.
2) Press the learning button. The LED will light up.
3) Press the button on the remote control, the LED flashes 4 times. This means that the remote control has been successfully programmed.
4) Repeat Compatible with another button.
5) The programming procedure Compatible with the 2nd channel is the same.
Delete all data from the memory card: Press and hold one of the learning buttons. The LED will start to flash. Hold this button until the LED turns off. All stored data on the memory card will be permanently deleted and cannot be recovered
Compatible:
All 433.92mhz fixed code remote controls.
Package contents:
1 x receiver
3 x remote control
Only the above package content, other products are not included.
Note: Light reflection and Compatible with different displays may cause the color of the item in the picture to be slightly Compatible with different from the real thing. The allowed measurement error is +/- 1-3 cm.