For Samsung Galaxy S20 Ultra SM-G988B 6.78 inch TFT LCD Screen Digitizer Full Assembly with Frame, Does Not Support Fingerprint Identification
Installation instructions
Tip 1: Test before installation
When testing, do not remove any protective film or labels. Pay attention to the problem of static electricity.
Before attempting any repair, make sure to ground yourself with an ESD (electrostatic discharge) wrist strap. This will prevent static electricity from damaging the electronic components inside the phone.
Make sure you wear eye protection and be careful not to cut your finger with glass splinters.
Tip 2: Simulate testing
Screen replacement is a very fragile product. We strongly recommend testing before installation. Please simulate testing, which means the mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test is complete. If the test is OK, please install it. If it cannot be displayed, please contact us the first time. And do not force it to be installed in the mobile phone. We are not responsible when the screen is installed.
Tip 3: Do not bend the cable too much
Make sure the LCD cable is not bent too much. Over 90 degrees bending will cause a black screen.
About the product
1. Replacement LCD screen + touch screen digitizer assembly with frame for Samsung Galaxy S20 Ultra SM-G988B 6.78 inch
2. Replace your broken or unusable item with a new one
3. Make your device look more refreshing than ever
4. Fits and works completely
5. Each item has been checked and is in good condition before shipping
6. Professional installation is highly recommended. We are not responsible when the screen is installed
7. Note: No fingerprint identification