Code cloner for an extra remote control in reserve: RF code cloner in remote control design to clone the codes from your old remote controls. Perfect for transferring/copying the code for garage doors, automatic gates, security systems, and household appliances.

Always a backup at hand: Copy the functions from your original remote control with this 4-channel RF duplicator with learning functions, so you always have a backup or extra garage door opener at hand.

Perfect for the garage door: Compatible with the fixed frequency 433 MHz, which is the frequency used by the vast majority of garage door openers.

Compatible with the following chipsets: 2260 (all manufacturers) 2262 (all manufacturers) PT2264, 5326 (all manufacturers) SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918 series, 527 (all manufacturers) 1527 (all manufacturers) 2240 (all manufacturers) HCS101, HCS200 HCS201 (parts of the code) HCS300 HCS301 (parts of the code) Parts of single chips.

NOTE: This model is not suitable for rolling code. In that case, you should get another model. Cannot copy car alarm box (for security reasons).

Specification:

Signal transmission speed: 50-60 KHz
Voltage: 12 V
Current: 10 mA
Frequency: 433 MHz
Signal transmission power: 10-12 mW
Signal transmission distance: Up to 50 m in open space
Color: Black/silver
Battery: 2V27A battery (included)
Size: 6x4x1.2 cm
Weight: 28 g

Package includes:

Universal code cloner - remote control

How to copy:

Step 1: Remove the old code from the duplicator

1. Continuously press buttons A and B until the LED flashes

2. Release button B (continue to press button A) and slowly press button B 3 times, the LED flashes

3. Release button A, code deletion is complete

Step 2: Copy code from the original remote control

1. Place the duplicator as close to the original remote control as possible.

2. Press and hold button A on the original remote control, press and hold button A on the duplicator, until you see the duplicator's LED flash.

3. Release both buttons, code copying is complete. Copy the next button in the same way.

Reset function:

Press and hold buttons C and D for 3 seconds, the LED flashes, all buttons return to the last copied codes.